banner
Intrusão

  • EN 50130
    Alarm systems
  • EN 50131
    Alarm systems - Intrusion and hold-up systems
  • EN 50131-1   
    Alarm systems - Intrusion and hold-up systems. Part 1: System requirements   
  • EN 50131-2-2   
    Alarm systems - Intrusion and hold-up systems. Part 2-2: Intrusion detectors - Passive infrared detectors   
  • EN 50131-2-3   
    Alarm systems - Intrusion and hold-up systems. Part 2-3: Requirements for microwave detectors   
  • EN 50131-2-4   
    Alarm systems - Intrusion and hold-up systems. Part 2-4: Requirements for combined passive infrared and microwave detectors   
  • EN 50131-2-5    
    Alarm systems - Intrusion and hold-up systems . Part 2-5: Requirements for combined passive infrared and ultrasonic detectors  
  • EN 50131-2-6   
    Alarm systems - Intrusion and hold-up systems. Part 2-6: Opening contacts (magnetic)   
  • CLC/TS 50131-2-7-1
    Alarm systems — Intrusion and hold-up systems — Part 2-7-1: Intrusion detectors — Glass break detectors (acoustic)
  • CLC/TS 50131-2-7-2
    Alarm systems — Intrusion and hold-up systems — Part 2-7-2: Intrusion detectors — Glass break detectors (passive)
  • CLC/TS 50131-2-7-3
    Alarm systems — Intrusion and hold-up systems — Part 2-7-3: Intrusion detectors — Glass break detectors (active)
  • EN 50131-2-7-3:2012/A IS1:2014
    Sistemas de Alarme - Sistemas de deteção contra intrusão - Parte 2-7-3:Detetores de intrusão - Detetores de quebra de vidro (ativos)
  • CLC/TS 50131-2-8
    Alarm systems — Intrusion and hold-up systems — Part 2-8: Intrusion detectors — Shock detectors
  • EN 50131-3   
    Alarm systems - Intrusion and hold-up systems. Part 3: Control and indicating equipment   
  • EN 50131-5-3   
    Alarm systems - Intrusion systems. Part 5-3: Requirements for interconnections equipment using radio frequency techniques   
  • CLC/TS 50131-5-4
    Alarm systems — Intrusion and hold-up systems — Part 5-4: System compatibility testing for I&HAS equipment located in supervised premises
  • EN 50131-6   
    Alarm systems - Intrusion and hold-up systems. Part 6: Power supplies   
  • EN 50131-6:2008/A1:2014
    Sistemas de alarme - Sistemas de deteção contra intrusão - Parte 6: Fontes de Alimentação
  • CLC/TS 50131-7
    Alarm systems - Intrusion and hold up systems. Part 7: Application guidelines.
  • EN 50131-8
    Alarm systems - Intrusion and hold up systems. Part 8: Security fog device/systems.
  • CLC/TS 50131-9:2014
    Sistemas de alarme - Sistemas de alarme contra intrusão e paragem - Parte 9: Verificação de alarme - Métodos e princípios
  • EN 50131-10:2014
    Sistemas de Alarme - Sistemas de deteção contra intrusão - Parte 10: Requisitos específicos de aplicação para comunicadores bidirecionais de instalações protegidas (SPT)
  • EN 50136
    Alarm systems - Alarm transmission systems and equipment
  • EN 50136-1-1
    Alarm systems - Alarm transmission systems and equipment. Part 1-1: General requirements for alarm transmission systems.
  • CLC/TS 50136-4
    Alarm systems - Alarm transmission systems and equipment - Part 4: Annunciation equipment used in alarm receiving centres
  • CLC/TS 50136-7
    Alarm systems - Alarm transmission systems and equipment - Part 7: Application guidelines
  • CLC/TS 50398
    Alarm systems. Combined and integrated systems. General requirements
  • EN 50486
    Equipment for use in audio and video door-entry systems.
  • IEC 60839-2-2   
    Alarm systems. Part 2: Requirements for intruder alarm systems. Section two: Requirements for detectors - General   
  • IEC 60839-2-3   
    Alarm systems. Part 2: Requirements for intruder alarm systems. Section three: Requirements for infrared-beam interruption detectors in buildings   
  • IEC 60839-2-4   
    Alarm systems. Part 2: Requirements for intruder alarm systems. Section four: Ultrasonic Doppler detectors for use in buildings   
  • IEC 60839-2-5   
    Alarm systems. Part 2: Requirements for intruder alarm systems. Section five: Microwave Doppler detectors for use in buildings   
  • IEC 60839-2-6   
    Alarm systems. Part 2: Requirements for intruder alarm systems. Section six: Passive infra-red detectors for use in buildings   
  • IEC 60839-2-7   
    Alarm systems. Part 2: Requirements for intruder alarm systems. Section seven: Passive glass-break detectors for use in buildings   



© 2017 SEGURANÇA ONLINE TODOS OS DIREITOS RESERVADOS